| Tweet |
Custom Search
|
|
|
||
 3500 ENGINE ATTACHMENTS
SPECIFICATIONS
AUXILIARY DRIVE SHAFT GROUP
(1)
Tighten bolts to a torque
of ................................ 45 7 N-m (32 5 lb. ft.)
Install seal as shown and put clean engine oil on
the lip of the seal at assembly.
TACHOMETER DRIVE
(1)
Put clean engine oil or glycerin on the O-ring
seal at assembly.
(2)
Bearing.
(3)
Install seal in cover (7) with the lip of the seal
toward bearing (2).
Put clean engine oil on the lip of the seal after it
is installed.
(4)
Tighten bolts in steps to a torque
of .......................... 100 15 Nm (75 11 lb. ft.)
Hit face of adapter (5) and tighten bolts in steps
to a torque
of .......................... 100 15 Nm (75 11 lb. ft.)
Again hit face of adapter (5) and again tighten
bolts in steps to a torque
of ......................... 100 15 Nm (75 11 lb. ft.)
(5)
Tachometer drive adapter.
(6)
Camshaft drive gear.
(7)
Cover (RH rear of engine).
441
|
||
|
||
