| Tweet |
Custom Search
|
|
|
||
 3500 ENGINE ATTACHMENTS
SPECIFICATIONS
3N5992 Gauge (Stewart-Warner Number 690-C)
CALIBRATION CHART
POINTER POSITION A
+ 60 A
+ 12 A
+ 0.8 mm (.03 in.)
TOLERANCE
OIL PRESSURE GAUGE
(ELECTRIC)
5L7456 Gauge 24V**; Use with 5L7450 Sending Unit
Range
............................ 0 to 550 kPa (0 to 80 psi)
Test voltage 285 V
TEST
0
13 5
30
RESISTANCE (ohms)
0
20
80
POINTER POSITION
+ 0.8 mm (.03 in.)
TOLERANCE*
*Measure tolerance from the end of the pointer to the
center-line of the mark on the face of the gauge.
*For 32V systems the 5L7441 Resistor (65 ohms) Is
used with this gauge.
WATER TEMPERATURE GAUGE
(ELECTRIC)
5L7444 Gauge 24V**; Use with 5L7442 Sending Unit
....................... 38 to 116 C (100 to 240 F)
Range
Test voltage .......................................................... 28 5 V
TEST
3388
1050
460
RESISTANCE ohms)
100
170
240
POINTER POSITION
+ 0.8 mm (.03 In.)
TOLERANCE*
'Measure tolerance from the end of the pointer to the
center-line of the mark on the face of the gauge
**For 32V systems the 5L7441 Resistor (65 ohms) is
used with this gauge
NOTE: FOR TORQUE VALUES NOT GIVEN, SEE THE FIRST
PAGE OF SPECIFICATIONS FOR GENERAL TIGHTENING TORQUES
455
|
||
|
||
