| Tweet |
Custom Search
|
|
|
||
 ELECTRIC PROTECTIVE SYSTEM
SYSTEMS OPERATION
SYSTEM TROUBLESHOOTING CHARTS
AND PROCEDURES
NOTE B.
Do Not Leave Starter Motor Engaged With
2.
Manually disengage by installing a
Engine Running. Engines that have electric
toggle switch to control the electric
starter motor(s), or a DC actuated air starter
starter motor magnetic switch (install
motor, automatically disengage when crank
the switch in series with the magnetic
termination rpm is reached. Positive (+)
switch coil lead).
battery voltage is removed from the engine
mounted or remote mounted starter controls
3.
Manually disengage by installing a
when the normally closed crank termination
toggle switch to control the air starter
contacts
open.
To
perform
test
solenoid valve (install the switch in
series with either of the solenoid valve
measurements, one of the methods that
leads).
follow may be necessary to disengage the
starter motor:
NOTE: For wiring diagrams and schematics, make
reference to Wiring Diagrams Section.
1.
Disconnect wire
at
speed
switch
terminal ESS-2.
540
|
||
|
||
