TM   5-2815-241-34&P OIL PAN INSTALLATION - CONTINUED ACTION LOCATION ITEM REMARKS 8. Oil pan (3) Suction  tube  with flange  (10),  two screws  (12),  two new  lockwashers  (13), and  new  gasket  (14), 7. Oil pump (9) Nut  (11) 8. Oil pan (3) Four  screws  (4) 9. Four  screws  (6), twenty-eight   screws (15)  and  twenty- eight  new lockwashers   (16) a. Position  suction  tube  with  flange  and gasket on oil pan. b. Using   1/2-inch   drive   9/16-inch   socket and ratchet handle, screw in and tighten. Using  1  7/8-inch  open-end  wrench, tighten. Using  1/2-inch  drive  1/2-inch  socket,  6- inch  extension,  and  0  to  150  ft  lb  (0  to  210 N•m) torque wrench, screw in and torque evenly 15 to 20 ft lb (20 to 27 N•m). Using   1/2-inch   drive   5/8-inch   socket, 6-inch  extension,  and  0  to  150  ft  lb  (0  to 210  N•m)  torque  wrench,  screw  in  and torque evenly 35 to 40 ft lb (47 to 54 N•m). TASK  ENDS  HERE TA   242395 2-97