TM 5-2815-241-34&P
Section V. CRANKCASE AND CYLINDER BLOCK MAINTENANCE
Page
Page
Cylinder Block.. ...............................................
2-140
Oil Pan .........................................................
2-175
Gearcase Cover.. .............................................
2-172
CYLINDER BLOCK
This task covers:
a. Disassembly (page 2-141)
c. Repair (page 2-153)
b. Cleaning/Inspection (page 2-142)
d. Assembly (page 2-168)
INITIAL SETUP
Tools
Tools - Continued
Adapter, drive, flex, 1/2-inch drive
Adapter, ST-1064
Bit, drill, 23/64-inch
Bit, drill, 23/32-inch
Bit, drill, 1 1/32-inch
Drill, electric, portable, 1/2-inch
Driver, bushing, camshaft, ST-1228
Driver, bushing, ST-1010-9
Driver, sleeve, repair
Driver, sleeve, salvage
Driver, sleeve, ST-1229
Driver, ST-1059
File, mill, flat, wide
Gage, bore, dial
Gage, concentricity, ST-1252
Gage, depth, dial indicator
Gage, thickness
Goggles, safety
Hammer, ball-peen, 16-ounce
Hammer, plastic-faced
Handle, driver, repair sleeve
Handle, ratchet, 3/8-inch drive
Handle, ratchet, 1/2-inch drive
Holder, ST-1065
Insert kit, screw thread, ST-476
Insert kit, screw thread, ST-1230
Key, hex, 1/2-inch
Key, square, 5/16-inch
Machine, milling
Micrometer, 0- to 1-inch
Micrometer, 6-inch to 7-inch
Micrometer, gate, tool bit
Micrometer, inside, 2- to 3-inch
Puller assembly, sleeve, ST-1202
Puller, bridge, sleeve, ST-1201
2-140
Change 1
Puller, pin
Ruler, 24-inch (60.9 mm)
Socket, 1 1/16-inch, 1/2-inch drive
Socket, 1 1/2-inch, 3/4-inch drive
Tool, boring, ST-1081
Tool, boring, ST-1177
Tool, counterbore, ST-1059
Tool, salvage, cylinder sleeve, ST-1168
Tool, salvage, cylinder sleeve, ST-1068
Tool, salvage, cylinder sleeve, ST-1184
Wrench, box-end, 7/16-inch
Wrench, box-end, 9/16-inch
Wrench, open-end, 1/2-inch
Wrench, open-end, 11/16-inch
Wrench, torque, 0 to 150 ft lb (0 to 210 N•m)
Wrench, torque, 0 to 600 ft lb (0 to 813.6
N•m)
Materials/Parts
Cloth, emery (item 1, appendix B)
Dye, leak-detection (item 7, appendix B)
Gasket, cylinder sleeve
Oil, lubricating (item 12, appendix B)
Packing, cylinder sleeve
Packing, preformed, cylinder sleeve
Pin, straight, cylinder block (as required)
Prussian blue (item 13, appendix B)
Rag, wiping (item 14, appendix B)
Tags, marker (item 17, appendix B)
Tape, antiseizing (item 18, appendix B)
Personnel Required
Two
|
|
