TM 5-2815-241-34&P
CYLINDER HEAD - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REPAIR/ASSEMBLY
NOTE
Step 22 is typical for all cylinder head crosshead guide pins tagged for replacement.
22. Cylinder head (3)
Crosshead guide
pin (4)
a.
Using ST-667 or ST-1134 dowel puller
(5), remove crosshead guide pin.
b.
Using arbor press and ST-633 cross-
head guide mandrel, press new cross-
head guide pin into cylinder head to
obtain protrusion (6) of 1.860 to
1.860 inches (47.24 to 47.75 mm).
If new crosshead guide pin will not
fit securely in cylinder head, dis-
card cylinder head.
T A 2 4 2 4 6 4
2-191
|
|