TM 5-2815-241-34&P
CYLINDER HEAD - CONTINUED
ACTION
LOCATION
I T E M
REMARKS
NOTE
Steps 24 and 25 are typical for all cylinder heads tagged for resurfacing.
24. Cylinder head (1)
Valve seat
Using ST-1133 valve seat extractor (6),
insert (5)
remove all valve seat inserts.
25. Cylinder head
mating surface (7)
Using surface grinder, resurface cylinder
head mating surface.
Only remove as much material as
necessary to repair damage to
cylinder head mating surface. If cyl-
inder head must be resurfaced so
cylinder head height (8) is less than
4.340 inches (110.24 mm), discard
cylinder head.
T A 2 4 2 4 6 6
2-193
|
|
