TM   5-2815-241-34&P ACCESSORY  DRIVE  -  CONTINUED ACTION LOCATION ITEM REMARKS 6. Accessory drive shaft  (1) Two keys (9) Using 1/4-inch flat-tip screwdriver, pry out. Discard. CLEANING NOTE For  general  cleaning  procedures,  see  General  Maintenance  Instructions,  page  2-3. INSPECTION/REPAIR 7. Accessory  drive shaft  (1) Using  1-  to  2-inch  micrometer,  check  out- side  diameter  at  bushing  area,  (10). If  accessory  drive  shaft  measures less  than  1.310  inch  (33.27  mm), discard  accessory  drive  shaft. 2-277