TM   5-2815-241-34&P TURBOCHARGER  AND  OIL  LINE  REMOVAL INITIAL  SETUP Tools Extension,   6-inch,   1/2-inch   drive Handle,   ratchet,   1/2-inch   drive Joint, universal, 1/2-inch drive Screwdriver,    flat-tip,    1/4-inch Socket,   9/16-inch,   1/2-inch   drive Wrench,   box-end,   1/2-inch Wrench,   box-end,   9/16-inch   (two required) Wrench,   open-end,   5/8-inch Wrench,   open-end,   3/4-inch Tools   -  Continued Wrench,  open-end,  1  1/4-inch Wrench,  open-end,  1  5/16-inch Wrench,  open-end,  1  3/8-inch Equipment   Condition Engine  mounted  on  engine  support  stand. (Engine  support  stand  and  mounting  instruc- tions) will be at the discretion of the repair facility. ACTION LOCATION ITEM REMARKS 1. Oil  cooler  (1)  and Oil supply line and turbocharger   (2) fittings   (3) 2. Bracket  (4)  on  oil cooler  (1) 3.  Turbocharger  (2) Screw (9) and clamp  (10) 4.  Turbocharger  (2)  and oil return hose fitting   (11) a. Using   1/2-inch   box-end   wrench   and 3/4-inch   open-end   wrench,   unscrew and take off oil supply line and fitting from oil cooler. b. Using  5/8-inch  and  3/4-inch  open-end wrenches, unscrew and take off oil sup- ply  line  and  fitting  from  turbocharger. Screw  (5),  flat washer  (6),  clamp (7), and nut (8) Using   two   9/16-inch   box-end   wrenches, unscrew and take off nut. Pull  off  screw,  flat  washer,  and  clamp from  bracket  and  screw  on  nut  to prevent  loss. Using   1/2-inch   box-end   wrench,   unscrew and take off screw, oil supply line, and fittings  from  turbocharger. Remove  screw  from  clamp  and  install on  turbocharger  to  prevent  loss. Oil return tube and hose  (12)  and clamp  (13) a.  Using  1/4-inch  flat-tip  screwdriver, loosen  clamp  and  disconnect  oil  return tube and hose from oil return hose fitting. b. Using  1  3/8-inch  and  1  5/16-inch  open- end wrenches, unscrew and take off oil return  tube  and  hose  from  turbocharger, 2-12