TM 5-2815-241-34&P
FUEL PUMP - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
NOTE
When installing shims, number of shims may vary to obtain proper clearance.
120. Governor plunger
Torque spring (7)
assembly (1)
and shims (8)
a.
Install shims as required.
b.
Install torque spring with small end
towards shoulder end of plunger by
twisting.
Replacement torque spring Is color
coded red-blue.
121.
Driver (6) and
thrust washer (2)
Using thickness gage, check clearance
between driver tang and thrust washer.
Clearance must be 0.002 to 0.005 inch
(0.05 to 0.13 mm).
If clearance does not meet these
dimensions, repair as necessary.
TA 242555
2-327
|
|