TM   5-2815-241-34&P OIL   DIPSTICK   TUBE   REMOVAL INITIAL  SETUP Tools Handle,   ratchet,   1/2-inch   drive Socket,  5/8-inch,  1/2-inch  drive Wrench,   box-end,   9/16-inch ACTION LOCATION ITEM REMARKS 1. Oil cooler (1) Screw  (2),  lock- washer  (3),  and bracket  (4) a. Using  9/16-inch  box-end  wrench,  un- screw and take off. Discard    lockwasher. b. Reinstall screw in oil cooler to prevent loss. 2. Oil pan (5) 3. 4. Two  screws  (6)  and two  lockwashers  (7) Using  1/2-inch  drive  5/8-inch  socket  and ratchet  handle,  unscrew  and  take  out. Discard    lockwashers. Oil  dipstick  tube Pull  out  of  oil  pan  to  remove. (8)  and  gasket  (9) Discard   gasket. Two  screws  (6)  and oil dipstick tube  (8) Install two screws in oil dipstick tube to pre- vent   loss. TA  242341 2-16