TM   5-2815-241-34&P FUEL  INJECTOR  -  CONTINUED ACTION LOCATION ITEM REMARKS 24. Injector  (7) Place into loading fixture (6). 25. Injector (7) Body   wrench no. 3375102 (9) Install  over  flats  on  injector,  tighten special screw (10) just enough to hold injector. 26. Loading fixture (8) Special  screw  (10) Using  3/8-inch  drive  0  to  150  in.  lb  (0  to 17.5  N•m)  torque  wrench,  tighten  to  75  in. lb  (8.5  N•m)  to  aline  injector  cup  and plunger  (4). 27. Injector (7) Cup  retainer  (6) Using  ST-995  retainer  wrench  (11),  1/2- inch drive 1 1/4-inch crowsfoot socket (12), and 0 to 175 ft lb (0 to 245 N•m) torque wrench (13) tighten to 50 ft lb (70 N-m). 28. Loading fixture (8) Injector  (7) Loosen  special  screw  (10)  and  remove  from loading  fixture. 29. Injector  (7) Remove all tools from injector. T A    2 4 2 5 8 3 2-365