TM    5-2815-241-34&P TURBOCHARGER  -  CONTINUED ACTION LOCATION ITEM REMARKS Bearing  housing  (3) e. Using  dial  indicator,  measure  length  of bearing  housing  from  compressor  stop to turbine stop, at several points. Maximum length is 2.994 inches (76.05 mm). Discard  if  less  than  2.986  inches (75.84  mm)  or  measurements  indi- cate  bearing  housing  is  distorted. 21. Floating   bearing   (4) a. inspect  for  cracks  and  chips. Discard  if  cracked  or  chipped. b. Using  1-  to  2-inch  micrometer,  meas- ure outside diameter at several places. Discard  if  micrometer  does  not  indi- cate  1.272  to  1.273  inches  (32.31  to 32.33 mm). c. Using  bore  gage,  measure  inside  diam- eter  of  bearing. Discard  if  bore  gage  does  not  indicate 0.7520  to  0.7525  inch  (19.101  to 19.114 mm). d. Using  3-  to  4-inch  micrometer,  meas- ure length of bearing. Discard  if  micrometer  does  not  indi- cate  3.078  to  3.080  inches  (78.18  to 78.23   mm). T A    2 4 2 6 0 0 2-391