TM 5-2815-241-34&P
WATER PUMP - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
17. Shaft (2)
Inner bearing (6)
and retaining
ring (7)
a.
Lubricate shaft with extreme-pressure
grease and position inner bearing on
shaft.
b.
Using arbor press and ST-658 mandrel
seated on inner race, press inner
bearing until seated on shoulder of
shaft.
c.
Using snapring pliers, install retaining
ring.
18.
Bearing spacer (8)
19.
Outer bearing (9)
Install.
Using arbor press and ST-658 mandrel
seated on inner race, press on outer
bearing until seated against bearing
spacer (8).
Check inner bearing and outer bearing
for free rotation.
T A 2 4 2 6 1 1
2-411
|
|