TM   5-2815-241-34&P LUBRICATING OIL PUMP REMOVAL INITIAL  SETUP Tools Extension,   6-inch,   1/2-inch   drive Handle,   ratchet,   1/2-inch   drive Socket,   9/16-inch,   1/2-inch   drive Tools   -  Continued Socket,   5/8-inch,   1/2-inch   drive Wrench,  open-end,  1  7/8.inch ACTION LOCATION ITEM REMARKS 1.  Bottom of lubrica- ting  oil  pump  (1) Tubing  nut  (2) 2. Oil pan (3) Two  screws  (4),  two lockwashers   (5) suction  tube  with flange  (6),  and gasket  (7) 3.  Left side of cylinder block (8) Five  screws  (9), five  lockwashers (10),  lubricating oil  pump  (1),  and gasket  (11) Using  1  7/8-inch  open-end  wrench,  loosen and   disconnect. Using  1/2-inch  drive  9/16-inch  socket  and ratchet  handle,  unscrew  and  take  off. Discard  gasket  and  lockwashers. Using   1/2-inch   drive   5/8-inch   socket, 6-inch  extension,  and  ratchet  handle, unscrew and take off. Discard  gasket  and  lockwashers. TASK   ENDS   HERE TA  242362 2-40