TM   5-2815-241-34&P OIL  PAN  REMOVAL INITIAL  SETUP Tools Personnel   Required Handle,   ratchet,   1/2-inch   drive Socket,   1/2-inch,   1/2-inch   drive Socket,   9/16-inch,   1/2-inch   drive Socket,   5/8-inch,   1/2-inch   drive Socket,   3/4-inch,   1/2-inch   drive Socket,   13/16-inch,   1/2-inch   drive Wrench,   box-end,   3/4-inch Wrench,  open-end,  1  7/8-inch Two ACTION LOCATION ITEM REMARKS NOTE If  oil  pump  has  been  removed,  proceed  to  step  3. 1. Oil  pump  bottom  (1) Nut  (2) 2. Oil pan (3) Two  screws  (4),  two lockwashers   (5), suction  tube  with flange (6) and gasket  (7) 3 Two  screws  (8),  two lockwashers  (9),  and two  nuts  (10) 4 5 Four  screws  (11) Using  1/2-inch  drive  3/4-inch  socket  and and  four ratchet  handle,  unscrew  and  take  out. lockwashers   (12) Discard   lockwashers. Four  screws  (13), four   lockwashers (14),  and  spacer  (15) Using  1/2-inch  drive  5/8-inch  socket  and ratchet  handle,  unscrew  and  take  out. Discard    lockwashers. Using  1  7/8-inch  open-end  wrench,  loosen and  disconnect. Using  1/2-inch  drive  9/16-inch  socket  and ratchet  handle,  unscrew  and  take  off. Discard   gasket   and   lockwashers. Using   1/2-inch   drive   13/16-inch   socket, ratchet   handle,   and   3/4-inch   box-end wrench,  unscrew  and  take  out. Discard   lockwashers. 2-44