TM 5-2815-241-34&P
CYLINDER HEAD INSTALLATION - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
5. Cylinder head (1)
Four new
packings (2)
Put in.
6.
Fuel crossover (3),
four screws (4),
and four new
lockwashers (5)
TASK ENDS HERE
CAM FOLLOWER HOUSING INSTALLATION
Using 1/4-inch drive flat-tip screwdriver bit
and 0 to 200 in. lb (0 to 23 N•m) torque
wrench, tighten to 34 to 38 in. lb (3.9 to
4.4 N•m).
INITIAL SETUP
Tools
Equipment Condition
Socket, 9/16-inch, 1/2-inch drive
Wrench, torque, 0 to 250 ft lb
(0 to 350 N.m), 1/2-inch drive
Camshaft installed (page 2-66).
Materials/Parts
Gasket, cam follower housing
Lockwasher (six required)
TA 242380
2-70
|
|
