TM  5-3895-360-13 APPENDIX  C COMPONENTS OF END ITEM AND BASIC ISSUE ITEMS LISTS Section   I.   INTRODUCTION C-1  .  SCOPE. This appendix lists Components of End Item and Basic Issue Items for the VR11C and VR11 Backfill Tampers to help you inventory items required for safe and efficient operation. C-2.  GENERAL. The Components of End Item and Basic Issue Items for the VR11C and VR11 are divided into the following sec- tions: (1) (2) Section II Components of End Item (COEI). This listing is for informational purpose only, and is not authority to requisition replacements. These items are part of the end item, but are re- moved and separately packaged for transpor- tation or shipment. As part of the end item, these items must be with the end item whenever it is issued or transferred between property ac- counts.  Illustrations  are  furnished  to  assist  you in identifying the items. Section Ill. Basic issue items (BII). These are the minimum essential items required to place the tamper in operation, to operate it, and to perform emergency repairs. Although shipped separately packaged, BlI must be with the tam- per during operation and whenever it is trans- ferred   between   property   accounts.   The illustrations will assist you with hard-to-identify items. This manual is your authority to request/ requisition replacement BlI, based upon TOE/ MTOE authorizations of the end item. C-3.  EXPLANATION  OF  COLUMNS. The following provides an explanation of columns found in the tabular listing: (1) (2) (3) (4) (5) Column (1) - Illustration Number (Illus Num- ber). This column indicates the number of the illustration in which the item is shown, Column  (2)   -   National Stock Number.  indi- cates  the  National  Stock  Number  (NSN)  as- signed   to   the   item   and   will   be   used   for requisitioning   purposes. Column  (3)  -  Description. Indicates the Fed- eral Item Name and, if required, a description to identify  and  locate  the  item.  The  last  line  for each item indicates the Commercial and Gov- ernment Entity (CAGE) Code in parentheses, followed by the part number. If item needed dif- fers for different models of this equipment, the model is shown under the “Usable On Code” heading in this column. Code Used On T77 VR11 VRC VR11C Column (4)   – Unit  of  Measure  (U/M).  indi- cates the measure used in performing the ac- tual   operational/maintenance   function.   This measure is expressed by a two-character al- phabetical abbreviation (e.g., ea, in., pr). Column   (5)    - Quantity   Required   (Qty Req’d). Indicates the quantity of the item autho- rized to be used with/on the equipment. C-1