TM 5-3895-360-13
CHAPTER 3
PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)
Section I. OPERATOR/CREW PREVENTIVE MAINTENANCE
CHECKS AND SERVICES (PMCS)
N u m b e r
Paragraph
Page
Paragraph Title
Number
3-1.
GeneraI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-1
3-2.
Service lntervals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-1
3-3.
Reporting Repairs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-1
3-4.
General PMCS Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-2
3-5.
Specific PMCS Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-2
3-6.
Leakage Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-3
Table 3-1;
Operator/Crew Preventive Maintenance Checks and Services (PMCS) . . . . . . . . . . 3-3
3-1. GENERAL.
a. To ensure that the tamper is ready for operation a tall
(2) Perform During (D) PMCS while operating the
times, it must be inspected on a regular basis so that
tamper.
defects maybe found before they result in serious
damage, equipment failure, or injury to personnel.
(3) Perform After (A) PMCS right after operating the
This section contains systematic instructions on in-
tamper.
spections, adjustments, and corrections to be per-
formed by the operator/crew.
b. When performing PMCS, read and follow all safety
3-3. REPORTING REPAIRS.
instructions found in the Warning Summary at the
front of this manual. Keep in mind all WARNINGS and
CAUTIONS.
All defects which the operator cannot fix must be re-
ported on a DA Form 2404, Equipment Inspection and
Maintenance Worksheet, immediately after completing
PMCS. If a serious problem is found, IMMEDIATELY re-
3-2. SERVICE INTERVALS.
port it to your supervisor.
Perform PMCS, found in Table 3-1, at the following inter-
vals:
(1) Perform Before (B) PMCS just before operating
the tamper.
3-1
|
|