4
5
6
7
8
9
10
11
12
13
14
15
4-18.
INSTALL TRANSMISSION TOP COMPONENTS
(SHEET 4 OF 16)
Align oil transfer plate (6) with four guide pins (3) and
install oil transfer plate on oil transfer plate gasket (5).
Using 1/2 inch socket, install 5/16-18 x 1-1/4 inch bolt
(7) and washer (8) in oil transfer plate (6).
Using torque wrench, tighten bolt (7) to 17-20 lb-ft
(23-27 N•m).
Install 5/16 inch diameter check ball (9) in check ball
hole on oil transfer plate (6).
Install separator plate (10) over four guide pins (3) and
on oil transfer plate (6).
TM 9-2520-272-34&P
Using 1/2 inch socket, install five 5/1 6-18 x 1-1/2 inch bolts (11) and washers (12) holding
separator plate (10), oi1 transfer plate (6), and gasket (5) to transmission.
Using torque wrench, tighten bolts (11) to 17-20 lb-ft (23-27 N•m).
Using 3/8 inch socket, install two 1/4-18 x 1-1/4 inch flanged-head bolts (13) holding
separator plate (10), oi1 transfer plate (6) and gasket (5) to transmission.
Using torque wrench, tighten bolts (13) to 9-11 Ib-ft (12-15 N•m).
Using 7/16 inch socket, install 1/4-18 x 1-1/2 inch bolt (14) and washer (15) holding separator
plate (10), oil transfer plate (6), and gasket (5) to transmission
Using torque wrench, tighten bolt (14) to 9-11 lb-ft (12-15 N•m).
Using screwdriver,
plate (10).
End of Task 1
Go to Sheet 5
remove two 5/16-18 x 3 inch guide pins (3) located at edge
of separator
Para. 4-18, Task 1
4-83
|
|
