TM-2520-272-34&P
4-18.
INSTALL TRANSMISSION TOP COMPONENTS
(SHEET 6 OF 16)
3 Install harness connector body (3) into transmission center housing hole (4) with key (6) in
receptacle (7) located at bottom.
4 Using screwdriver, install four No. 4-40 x 7/16 inch screws (8) holding harness connector
body (3) and gasket (1) to transmission. Do not tighten screws.
5 Using socket, adapter and torque wrench, tighten screws (8) to 3-5 lb-in (0.3-0.6 N•m).
FOLLOW-ON PROCEDURE: Connect harness to solenoids and attach harness ground
connector. Refer to this paragraph TASK 7.
End of Task 2
Go to Sheet 7
Para. 4-18, Task 2
4-85
|
|
