TM 9-2520-272-34&P
4-28.
DISASSEMBLE CENTER HOUSING
19
20
21
22
23
24
25
26
27
(SHEET 4 OF 19)
Using screwdriver, remove seals (20, 21) from brake cam (17).
Using screwdriver, remove preformed packings (22, 23) from face of brake cam (17).
Using 7/16 inch socket, remove bolt (24) and two spring tension clips (25) from brake cam
(17).
Remove brake adjusting linkage (19) from brake cam (17).
Unscrew inner brake adjusting link (26) from outer brake adjusting link (27).
REPAIR: Refer to paragraph 4-29 for replacement of pin in inner brake adjusting link (26).
Remove four brake reaction pins (28).
Remove spur gear cluster (30).
Remove thrust washer bearing (31) from output carrier
assembly (32) or from underside of spur gear cluster
(30).
Remove output carrier (32), brake clutch drum (33)
and retaining ring (34), as an assembly and turn it over
for disassembly.
Go to Sheet 5
Para. 4-28, Task 1
.
4-175
|
|
