TM 9-2520-272-34&P
4-30.
ASSEMBLE CENTER HOUSING
(SHEET 3 OF 20
1 Install new packings (1, 2) onto first clutch Piston (3).
Coat packings (1, 2) with petrolatum.
2 Install piston and sea
center housing.
assembly sleeve 12268021 into
3 Mark outer piston face with felt tip marker across
from tang. Mark range bore above slot in center
housing. This will assist in properly locating piston (3)
in center housing.
4 Using two pairs of slip joint pliers, grasp cross
members on first clutch piston (3) at two points, 180
degrees apart and install piston (3) into center
housing. Index the tang on piston with the slot in
center housing.
5 Remove sleeve 12268021.
6 Install twenty-six springs (4) into spring pockets in
piston (3).
7 Install spring retainer (5) over springs (4). Be sure
twenty-six springs (4) are seated in retainer (5).
Go to Sheet 4
4-224
Para. 4-30, Task 2
|
|
