ARMY TM 9-2805-256-14
AIR FORCE TO 38G2-102-2
NAVY NAVFAC P-8-611-14E
5-8. Governor Assembly (cont).
d.
Installlation. (figure 5-5)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
NOTE
Steps 1 and 3 are for engines equipped with breaker point ignition.
Install ground strap on mounting screw (19).
Install governor assembly (21) and gasket (22) and secure with screws (19) and washers (20).
Connect condenser lead (17) to noise suppression filter (18).
Install gasket (16), rear cover (15), gasket (14), and throttle housing (3) and secure with two screws (12)
and washers (13).
Position throttle lever (10) on throttle rod (11) and secure with two screws (12) and washers (13).
Install throttle housing cover (6) and gasket (7) and secure with two screws (4) and washers (5).
Install control rod housing (2) on throttle housing (3) and secure with clamp (1).
5-14
|
|
