ARMY TM 9-2805-256-14
AIR FORCE TO 38G2-102-2
NAVY NAVFAC P-8-611-14E
5-14. Cylinder Head.
This task covers:
a. Removal
b. Repair
c. Installation
INITIAL SETUP
Tools
Equipment Condition
General Mechanic’s Tool Kit (Item 1, Appendix B)
Spark plug removed (para. 4-19).
Wrench, Torque (NSN 5120-00-230-6380) (Item 3,
Breather line removed (para. 4-32).
Appendix B)
Intake manifold removed (para. 4-39).
Compressor, Spring (NSN 5330-00-096-6677)
Exhaust manifold removed (para. 4-40).
(Item 3, Appendix B)
Rocker cover removed (para. 4-25).
Flywheel cover removed (para. 4-16)
Materials/Parts
Rags, Wiping (Item 6, Appendix D)
Solvent, Drycleaning (Item 7, Appendix D)
Gasket, Cylinder Head Mounting
(NSN 5330-00-819-8734)
Packing, Pushrod Housing (NSN 5330-00-797-3510)
a. Removal. (figure 5-11)
(1) Turn flywheel clockwise until both valves are closed.
(2) Remove four nuts (1) and washers (2) and remove cylinder head assembly (3) and gasket (4).
(3) Remove push rods (5), push rod housings (6) rear cylinder cover (7) and preformed packings (8).
5-26
|
|
