ARMY TM 9-2805-256-14
AIR FORCE TO 38G2-102-2
NAVY NAVFAC P-8-611-14E
4-28. Breaker Points Cover (Breaker Point Ignition).
This task covers:
a . R e m o v al
b. Inspect
c. Installation
INITIAL SETUP
Tools
General Mechanic’s Tool Kit (Item 1, Appendix B)
Materials/Parts
Gasket, Breaker Point Cover (NSN 5330-00-103-8793)
a. R e m o v a l . (figure 4-19)
(1) Unsnap two clips (1) securing breaker points cover (2) and remove cover (2) and gasket (3).
(2) Remove nut (4) and washers (5) securing ground strap (6) to cover.
(3) Remove screw (7) plastic washer (8), and nut (9).
b. I n s p e c t i o n.
(1) Inspect gasket (3) for wear or other damage and replace as needed.
(2) Inspect plastic washer (8) and replace if cracked or otherwise damaged.
c . I n s t a l l a t i on. (figure 4-19)
(1) Install screw (7), plastic washer (8), and nut (9) in cover (2).
(2) Install ground strap (6) on cover and secure with washer (5) and nut (4).
(3) Position cover (2) and gasket (3) on engine and secure with two clips (1).
4 - 42
|
|
