ARMY TM 9-2805-256-14
AIR FORCE TO 38G2-102-2
NAVY NAVFAC P-8-611-14E
4 - 3 1 . C o n d e n s e r ( B r e a k e r P o i n t I g n i t i o n ) .
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
General Mechanic’s Tool Kit (Item 1, Appendix B)
a. Removal.
(figure
4-22)
(1) Unsnap two clips (1) securing breaker points cover (2) and move cover out of way.
(2) Remove screw (3), washer (4) securing connector bar (5) to condensor (6), and move out of way.
(3) Remove nut (7) and washer (8) securing wires to suppression unit (9).
(4) Remove screw (10) and washer (11) securing condensor (6) and remove condensor.
b.
Installation. (figure 4-22)
(1) Install condensor (6) and secure using screw (10) and washer (11).
(2) Install condensor lead onto suppression unit (9) and secure with nut (7) and washer (8).
(3) Attach connector bar (5) to condensor (6) and secure with screw (3) and washer (4).
(4) Install breaker points cover (2) and secure with two clips (1)
4 - 48
|
|
