ARMY TM 9-2805-257-14
AIR FORCE TO 38G2-103-2
NAVY NAVFAC P-8-612-14E
5-8. Governor Assembly (cont).
d. Installation. (figure 5-5)
(1)
(2)
(3)
(4)
(5)
(6)
5-14
NOTE
On engines with breaker point ignitions install grounding strap at lower left of governor
assembly.
Install governor assembly (23) and gasket (24) and secure with three screws (21) and washers (22).
Connect condenser leads (17) and (18) to noise suppression filters (19) and (20) and remove tags.
Install gasket (16), rear cover (15), gasket (14), and throttle housing (3) and secure with two screws (12)
and washers (13).
Position throttle lever (10) on throttle rod (11) and secure with screw (8) and washer (9).
Install throttle housing cover (6) and gasket (7) and secure with two screws (4) and washers (5).
Install control rod housing (2) on throttle housing (3) and secure with clamp (1).
|
|
