ARMY TM 9-2805-257-14
AIR FORCE TO 38G2-103-2
NAVY NAVFAC P-8-612-14E
5-10. Ignition Control Unit (Breakerless Ignition).
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
General Mechanic’s Tool Kit (Item 1, Appendix B)
a. Removal. (figure 5-7)
(1) Disconnect low voltage cable (1) from ignition control unit (2).
(2) Loosen connector nut (3) and remove high tension cable (4) from ignition control unit (2).
(3) Loosen connector nut (5) and remove high tension cable (6) from ignition control unit (2).
(4) Remove two screws (7) and washers (8) and remove ignition control unit (2).
b.
Installation. (figure 5-7)
(1)
(2)
(3)
(4)
5-18
Install ignition control unit (2) and secure with two screws (7) and two washers (8).
Connect low voltage cable (1) to ignition control unit (2).
Install high tension cable (4), and tighten connector nut (3).
Install high tension cable (6), and tighten connector nut (5).
|
|
