Custom Search
ARMY TM 9-2805-257-14 AIR  FORCE  TO  38G2-103-2 NAVY NAVFAC P-8-612-14E 5-11. Transformer  (Breakerless  Ignition). This task covers: a.  Removal b.  Installation INITIAL  SETUP Tools General Mechanic’s Tool Kit (Item 1, Appendix B) NOTE This  engine  is  equipped  with  two  transformers,  the  removal  and  installation  procedures are the same for both. a. Removal. (figure 5-8) (1) (2) (3) (4) (5) Remove six screws (1) and remove cover (2). Tag and remove transformer leads from ignition control unit (3). Loosen connector nut (4) and remove ignition cable (5) from ignition control unit (3) Remove nut (6) and remove transformer (7) and O ring (8). Inspect O ring (8) and replace if ripped or otherwise damaged. b. Installation (figure 5-8) (1) Install transformer (7) and O ring (8) and secure with nut (6). (2) Connect transformer leads as tagged. (3) Install cover (2) and secure with six screws (1). (4) Install ignition cable (5) and tighten connector nut (4). 5-20


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business