|
|
|
|
|
ARMY TM 9-2805-257-14
AIR FORCE TO 38G2-103-2
NAVY NAVFAC P-8-612-14E
4-22. Clamps and Hoses.
This task covers:
Replacement
INITIAL SETUP
Tools
General Mechanic’s Tool Kit (Item 1, Appendix B)
a. Relacement. (figure 4-13)
NOTE
The procedures for replacing the hoses and clamps are the same for either dry element
or oil bath air cleaners.
(1) Loosen clamp (1) and remove hose (2) from air intake elbow (3).
(2) Loosen clamp (4) and remove hose (2) from air cleaner (5).
(3) Loosen clamp (6) and remove hose (7) from air cleaner (5).
(4) Remove screw (8) and washer (9) and remove hose loop clamp (10) and hose (7).
(5) Inspect hoses and clamps for damage and replace as needed.
(6) Install hose loop clamp (10) and hose (7) and secure with screw (8) and washer (9).
(7) Install hose (7) on air cleaner (5) and secure with clamp (6).
(8) Install hose (2) on air cleaner (5) and secure with clamp (4).
(9) Install hose (2) on air intake elbow (3) and secure with clamp (1).
4 - 3 2
|
|
|
|
|
Privacy Statement -
Copyright Information. -
Contact Us
