(15)
(16)
(17)
(18)
(19)
(20)
(21)
(22)
(23)
(24)
(25)
(26)
ARMY TM 9-2805-258-14
AIR FORCE TO 38G2-89-21
NAVY NAVFAC P-8-614-14E
Install idle speed jet (27) and spring (28).
Install two bearings (26), rubber seal (25) and seal retainer (24).
Install throttle shaft (22).
Install throttle plate (21) and secure with two screws (20) .
Install cap plug (23).
Install throttle lever (19) and secure with nut (17) and washer (18).
Install two felt seals (16), choke shaft (15) and retaining washer (14).
Install choke plate (13) and secure with two screws (11) and washers (12).
Install float valve seat (9) and gasket (10).
Install gasket (8), float (5), spring (6), fuel valve (7) and pin (4).
Turn carburetor (31) upside down and adjust float height by gently bending float tab resting on float valve
(7) to 0.20 in. (0.5 cm) above carburetor bottom.
Install bowl (3) and secure with screw (1) and washer (2).
Figure 5-6. Carburetor, Repair.
5 - 15
|
|
