ARMY TM 9-2805-258-14
AIR FORCE TO 38G2-89-21
NAVY NAVFAC P-8-614-14E
5-17. Cylinder Head Assembly (cont).
c.
Installation. (figure 5-13)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
5 - 28
Ensure gasket mating surfaces are clean, and old gasket material is removed.
Install preformed packings (8).
Install cylinder head (12), and secure with four nuts (15) and washers (16). Torque nuts to 22-24 Ib-ft
(47193 -51484 gr cm).
Install pushrod housings (7) through head (12) into crankcase.
Install pushrods (6).
Install retainer plate (5) and secure with two spring clamps (4).
Position rockers (2) and bushings (3) on pushrods (6) and tighten nuts (1). Torque nuts to 72-86 in.-lb
(12870 -15373 gr cm).
Install access plug (14).
Install rocker box hose (13).
Position intake manifold (10) and gasket (11) and secure with two assembled screws and washers (9).
|
|
