ARMY TM 9-2805-258-14
AIR FORCE TO 38G2-89-21
NAVY NAVFAC P-8-614-14E
4-32. Magneto and Gear (cont).
c.Installation (Gear).(figure
4-25)
(1) Install gear (20) on magneto (3).
(2) Install washer (19) and secure with retaining ring (18).
d.
Installation.. (figure 4-25)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
4 - 5 6
Rotate starter rope pulley (21) until both rockers (22) open and close, and stop when timing mark on
camshaft gear (23) is present.
Install magneto (3) and gasket (17) and position magneto gear (20) so that timing mark on magneto gear
(20) alines with camshaft gear (23) timing mark.
Secure magneto (3) with screw (14), Iockwasher (15) and flat washer (16).
Position manual choke bracket (13) and secure with bolt (9), washer (10), Iockwasher (11) and nut (12).
Install lead (8) as tagged and secure with assembled screw and washer (7).
Install clip under screw (6) and tighten screw (6).
Install high tension cable (5) as tagged, and tighten connector nut (4).
Install high tension cable (2) as tagged, and tighten connector nut (1).
|
|
