ARMY  TM  9-2805-262-14 AIR  FORCE  TO  38G2-90-1 NAVY  NAVFAC   P-8-613-14E 4-36.  Top   Cover. This  task  covers: a.  Removal b. Repair c.  Installation INITIAL  SETUP Tools Equipment  Condition. General  Mechanic’s  Tool  Kit  (Item  1,  Appendix  B) Right and left side cylinder head covers, internal covers  removed  (para.  4-34). Materials/Parts Carburetor  adapter  removed  (para.  4-26). Fuel  line  removed  (para.  4-23). Rags,  Wiping  (Item  7,  Appendix  D) Solvent,  Drycleaning  (Item  8,  Appendix  D) a. Removal. (figure 4-31) (1) Remove adapter (1) from fuel pump (2), (2)  Remove  top  cover  (3). b. Repair. WARNING Drycleaning  solvent  PD-680  used  to  clean  parts  is  potentially  dangerous  to  personnel  and property. Avoid repeated and prolonged skin contact. Do not use near open flame or excessive heat. Flash point of solvent is 100°F-138°F  (38°C–60°C). (1) (2) Clean  top  cover  in  drycleaning  solvent  and  dry  thoroughly. Repair any dents found in top cover and repaint as needed. c.   Installation. (figure 4-31). (1)  Install  top  cover  (3). (2) Install adapter (1) on fuel pump (2). 4-66