ARMY TM 9-2805-262-14
AIR FORCE TO 38G2-90-1
NAVY NAVFAC P-8-613-14E
4-41. Oil Filter (cont).
b.
. (figure 4-38)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
Remove drain plug (1) or (2) and washer (3) and drain oil into suitable container.
Using oil filter wrench, remove oil filter (4).
Oil surface of gasket on new oil filter sparingly, install oil filter (4) until seated, then 3/4 turn more.
install drain plug (1) or (2) and washer (3).
Fill crankcase (refer to LO 9-2805-203-12 for proper grade) and check oil level.
Start engine, para. 2-9, run for five minutes and check for leaks.
Stop engine, para. 2-10, recheck oil level and add oil if needed.
4-78
|
|
