|
|
|
|
|
ARMY TMr 9-2805-262-14
AIR FORCE TO 38G2-90-1
NAVY NAVFAC P-6-613-14E
4-46. Condenser (Breaker Point Ignition).
This task covers:
Replacement
INITIAL SETUP
Tools
Equipment Condition
General Mechanic’s Tool Kit (Item 1, Appendix B)
Breaker point cover removed (para. 4-44).
Replacement. (figure 4-45)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
NOTE
The replacement procedures are the same for both condensers.
Remove two screws (1) and washers (2) and remove connector bar (3).
Remove two screws (4) and washers (5) securing two cable clamps (6) and remove cable clamps (6).
Remove nut (7) and Iockwasher (8) and tag and remove condenser lead (9) from noise suppression
filter (10).
Remove screw (11) and washer(12) and remove condenser (13).
Install condenser (13) and secure with screw (11) and washer (12).
Connect condenser lead (9) to noise suppression filter (10) and secure with nut (7) and washer(8).
Install two cable clamps (6) and secure with two screws (4) and washers (5).
Install connector bar (3) and secure with two screws (1) and washers (2).
4-92
|
|
|
|
|
Privacy Statement -
Copyright Information. -
Contact Us
