ARMY TM 9-2805-262-14
AIR FORCE TO 38G2-9W1
NAVY NAVFAC P-8-613-14E
4-47.
d.
Coil Cover (cont).
(1)
(2)
(3)
(4)
(5)
(6)
Removal(BreakerlessIgnition) . (figure 4-47)
Remove screw (1) and washer (2) securing loop clamp (3), and remove loop clamp (3) from lead (4).
Disconnect two low voltage cables (5) and (6) from junction box (7).
Remove four screws (8) and washers (9) securing coil cover (10) and open coil cover.
Tag and disconnect coil leads (11) from coil cover (10) and remove coil cover (10) and gasket (12).
Inspect coil cover (10) and replace if cracked or otherwise damaged.
Inspect gasket (12) and replace if torn or otherwise damaged.
e. Installation (Breakerless Ignition). (figure 4-47)
(1)
(2)
(3)
(4)
(5)
4-96
Connect coil leads (11), as tagged to coil cover (10).
Ensure gasket surfaces are clean and free of old gasket.
Install coil cover (10) and new gasket(12) and secure with four screws (8) and washers (9).
Connect low voltage cables (5) and (6) to junction box (7).
Install lead (4) and secure with loop clamp (3), screw (1), and washer (2).
|
|
