|
ARMY TM 9-2805-262-14
AIR FORCE TO 38G2-90-1
NAVY NAVFAC P-8-613-14E
4-50. Ignition Timing (Breaker Point Ignition).
This task covers:
Adjustment
INITIAL SETUP
Tools
Equipment Condition
General Mechanic’s Tool Kit (Item 1, Appendix B)
Number one cylinder rocker cover removed
(para. 4-32).
Breaker point cover removed (para. 4-44).
Adjustment. (figure 4-51)
(1) Rotate starter rope pulley (1) until both rockers (2) open and close, and stop when top dead center
(TDC) mark (3) alines with timing mark (4).
(2) Observe lower contact points cam follower (5), it should be on the highest point of ignition cam (6). If
not, loosen screw (7) and rotate ignition cam (6) until cam follower (5) is on highest point of ignition cam
(6), and tighten screw (7).
4-104
|
|
