ARMY TM 9-2805-262-14
AIR FORCE TO 38G2-90-1
NAVY NAVFAC P-8-613-14E
5-14. Ignition Module (Breakerless Ignition).
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
General Mechanic’s Tool Kit (Item 1, Appendix B)
NOTE
The removal and installation procedures are the same for both ignition modules.
a. Removal. (figure 5-11)
NOTE
There are five screws securing cover on left hand side of engine.
(1) Remove four screws (1) and remove cover (2) and gasket (3).
(2) Tag and remove wiring from ignition module (4).
(3) Remove two screws (5) and washers (6) and remove ignition module (4).
b.
Installation. (figure 5-11)
(1)
(2)
(3)
5-26
Install ignition module (4) and secure with two screws (5) and washers (6).
Connect wiring as tagged.
Install cover (2) and gasket (3) and secure with four screws (1).
|
|
