ARMY TM 9-2805-262-14
AIR FORCE TO 38G2-90-1
NAVY NAVFAC P-8-613-14E
5-24. Flywheel Housing and Protective Screen.
This task covers:
a. Removal
b. Inspection
c. Installation
INITIAL SETUP
Tools
Equipment Condition
General Mechanic’s Tool Kit (Item 1, Appendix B)
Winterization shroud removed (para. 4-33).
Flywheel removed (para.5-23).
a. Removal. (figure 5-23)
(1)
(2)
(3)
Remove three screws (1) and remove rear engine bracket (2).
Remove four clips (3), screw (4), washer (5), and remove protective screen (6).
Remove four nuts (7), washers (8), and remove flywheel housing (9).
b. Inspection. (figure 5-23)
(1) Inspect protective screen (6) and replace if bent or otherwise damaged.
(2) Inspect flywheel housing (9) and notify general supporl maintenance if flywheel housing (9) is cracked or
otherwise damaged.
c.
Installation. (figure 5-23)
(1) Install flywheel housing (9) and secure with four nuts (7) and washers (8).
(2) Install protective screen (6) and secure with screw (4), washer (5) and four clips (3).
(3) Install rear engine bracket (2) and secure with three screws (1).
5-50
|
|
