ARMY TM 9-280S262-14
AIR FORCE TO 38G2-90-1
NAVY
6-13.
c.
6-20
NAVFAC P-8-613-14E
Crankshaft and Center Main Bearing (cont).
Installation. (figure 6-9)
NOTE
Do not reuse Iockwashers.
(1) Install center main bearing halves (10) on crankshaft (11) and secure with two screws (12) and washers
(13). Torque bolts to 44-55 in.-lb. (7858-9823 gr cm).
(2) Install crankshaft (11), aline center main bearing (10), and secure with screw (8) and washer (9).
(3) Install two retaining rings (6) using suitable snap ring pliers.
(4) Aline timing marks on camshaft gear (7) and crankshaft gear (14) and install camshaft gear (7).
(5) Position connecting rod and piston (4) on crankshaft (11) and install connecting rod bearing cap (3),
Iockwasher (1) and secure with two bolts (2). Torque bolts to 96-108 in.-lb (11064-12447 gr cm).
(6) Bend tangs on Iockwasher (1).
(7) Repeat steps 5 and 6 for remaining pistons.
|
|
