Custom Search
ARMY  TM  9-2805-262-14 AIR  FORCE  TO  38G2-90-1 NAVY  NAVFAC  P-8-613-14E C. Service Operations required periodically to keep an item in proper operating condition, i.e., to clean (includes  decontaminate),  to  presewe,  to  drain,  or  to  replenish  fuel,  lubricants,  hydraulic  fIuids,  or  compressed  air supplies. d. Adjust To maintain within prescribed limits, by bringing into proper or exact position, or by setting the operating  characteristics  to  the  specified  parameters. e. Aline. TO adjust specified variable elements of an item to bring about optimum or desired performance. f. Calibrate To determine and cause corrections to be made or to be adjusted on instruments or test measuring and diagnostic equipment used in precision measurement. Consists of comparison of two instruments, one of which is a certified standard of known accuracy, to detect and adjust any discrepancy in the accuracy of the instrument  being  compared. g. Install The act of emplacing, seating, or fixing into position an item, part, or module (component assembly) in a manner to  allow the  proper  functioning  of  an  equipment  or  system. h. Replace. The act of substituting a serviceable like type part, a subassembly, or module (component or assembly)  for  an  unserviceable  counterpart. i. Repair.  The application of maintenance services (inspect test, service, adjust, aline, calibrate, or replace) or  other  maintenance  actions  (welding,  grinding,  riveting,  straightening,  facing,  remachining,  or  resurfacing)  to restore  serviceability  to  an  item  by  correcting  specific  damage,  fault,  malfunction,  or  failure  in  a  part,  subassembly, module (component or assembly), end item, or system. j. Overhaul  That maintenance effort (service/action) necessary to restore an item to a completely serviceable  operational  condition  as  prescribed  by  maintenance  standards  in  appropriate  technical  publications (i.e., DMWR). Overhaul does not normally return an item to a like new condition. k. Rebuild. Consists of those services/actions necessary for the restoration of unserviceable equipment to a like new condition in accordance with original manufacturing standards. Rebuild is the highest degree of materiel maintenance applied to Army equipment. The rebuild operation includes the act of returning to zero those age measurements  (hours/miles,  etc.)  considered  in  classifying  Army  equipment/components. B-4. Explanation of Columns in the MAC, Section Il. a. Column (1). Group Number. Column 1 lists functional group code numbers which are assigned to identify maintenance  significant  components,  assemblies,  subassemblies,  and  modules  to  their  next  higher  assembly. b. Column (2) Component/Assembly. contains   the   item   names   of   components,   assemblies, subassemblies, and modules for which group numbers (column1) are assigned and for which maintenance is authorized. c. Column  (3).  Maintenance  Function. Column 3 lists the functions to be performed on items listed in Column 2, (Function definitions are contained in paragraph A-3.) B-2


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business