ARMY TM 9-2805-262-14
AIR FORCE TO 38G2-90-1
NAVY NAVFAC P-8-613-14E
4-14.
b.
Air Cleaner Assembly (cont).
Removal. (figure 4-3)
(1) Loosen clamp (1) and disconnect duct (2) from upper housing (3).
(2) Loosen clamp (4) and disconnect duct (5) from lower housing (6).
(3) Loosen two retaining bolts (7) and remove upper housing (3).
(4) Remove element (8) from lower housing (6).
(5) Remove three screws (9) and washers (10) and remove lower housing (6) and bracket (11).
NOTE
Perform step 6 only if bracket or lower housing are being replaced.
(6) Remove bolt (12), washer (13), Iockwasher (14) and nut (15) and remove bracket(11) from lower
housing (6).
c.
Installation. (figure 4-3)
(1) Install bracket (11) and secure with bolt (12), washer (13), Iockwasher (14), and nut (15).
(2) Install lower housing (6) and secure with three screws (9) and washers (10).
(3) Install element (8) in lower housing (6).
(4) Install upper housing (3) and secure with two retaining bolts (7).
(5) Install duct (5) on lower housing (6) and tighten clamp (4).
(6) Install duct (2) on upper housing (3) and tighten clamp (1).
4-14
|
|
