ARMY TM 9-2805-262-14
AIR FORCE TO 38G2-90-I
NAVY NAVFAC P–8-613-14E
4-22. Governor Assembly.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
Equipment Condition
General Mechanic’s Tool Kit (Item 1, Appendix B)
Oil tube removed (para. 4-19).
Throttle control assembly removed (para. 4-20).
Materials/Parts
Gasket, Governor Mounting (P/N 13206E0184)
a. Removal. (figure 4-14)
(1) Loosen ball joint nut (1) and remove governor control rod (2) from governor (3).
(2) Remove two screws (4) and washers (5) and remove governor (3) and gasket (6).
b.
Installation. (figure 4-14)
(1)
(2)
(3)
(4)
4-32
Ensure gasket surfaces are clean and free of old gasket material.
Install governor (3) and new gasket (6) and secure with two screws (4) and washers (5).
Position governor control rod (2) on governor (3) and install and tighten ball joint nut (l).
Adjust governor (para. 4-21).
|
|
