ARMY TM 9-2805-262-14
AIR FORCE TO 38G2-90-1
NAVY NAVFAC P-8-613-14E
4-32. Rocker Box Cover.
This task covers:
a. Removal
b. Repair
c. Installation
INITIAL SETUP
Tools
Materials/Parts
General Mechanic’s Tool Kit (Item 1, Appendix B)
Rags, Wiping (Item 7, Appendix D)
Solvent, Drycleaning (Item 8, Appendix D)
Gasket, Rocker Box Cover (NSN 5330-00-797-4642)
a. Removal. (figure 4-26).
(1) Remove screw (1) and plastic washer (2) and remove rocker box cover (3) and gasket (4).
(2) Repeat step 1 for remaining rocker box covers.
b. Repair.
WARNING
Drycleaning solvent PD-680 used to clean parts is potentially dangerous to personnel and
property. Avoid repeated and prolonged skin contact. Do not use near open flame or
excessive heat. Flash point of solvent is 10O°F-l 38°F (38°C–60”C).
(1) Clean rocker box covers in drycleaning solvent and dry thoroughly.
(2) Repair any dents in rocker box covers and repaint as needed.
(3) Inspect plastic washers and replace if cracked or otherwise damaged.
c.
Installation. (figure 4-26)
(1) Install rocker box cover (3) and new gasket (4) and secure with screw (1) and plastic washer (2).
(2) Repeat step 1 for remaining rocker box covers.
4-56
|
|
