| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
FUEL SUPPLY PUMP REPLACEMENT (2CA AND 2DA)
0047 00
PURGE FUEL SYSTEM
WARNING
1. Turn master switch and in-tank fuel pump switches to "ON" position.
2. Operate in-tank fuel pump for 1 or 2 minutes. Simultaneously operate purge pump,
completing 4 or 5 strokes after firm handle pressure is noted.
CAUTION
U
Do not depress flame heater button. Damage to engine could occur.
3. With in-tank pumps operating, open bleeder valves (12, 13) (on cover of both primary (14) and
fuel/water separator (15) filters) until all fuel (no air) is noted.
4. Close bleeder valves (12, 13) when fuel flows from both.
13
15
12
14
END OF WORK PACKAGE
WP 0047 00-3 (4 blank)
|
||
|
||
