| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
STARTER MOTOR REPLACEMENT
0049 00
REMOVAL (Continued)
WARNING
The starter is heavy. Take care during removal or installation to
prevent injury.
4. Remove starter (23).
a. Remove self-locking nuts (24) and clamping bars (25) to remove U-bolt (26). Discard
self-locking nuts.
CAUTION
Use care in removing cradle to avoid damaging black solenoid-to-
motor ground wire.
b.
Remove remaining three screws (8) with flat washers (9) to remove starter support (10)
and cradle (27) as an assembly.
c.
Position suitable wooden blocks under starter (23) for support.
d.
Remove self-locking nuts (28) from two screws (29) and one stud (30) (behind starter)
using open-end wrench. Discard self-locking nuts.
e.
Remove starter (23) and mounting gasket (31) from starter adapter (32). Discard gasket.
29
26
32
30
31
28
23
25
27
24
10
8
9
WP 0049 00-4
|
||
|
||
