| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
SIGNAL WIRING HARNESS REPLACEMENT (2CA) (PN 12254376, 12354385) 0057 00
INSTALLATION (Continued)
8. Install harness (26) at front of engine (continued).
NOTE
Damper housing mounted hour meter harness installation
instructions are covered in step 8, i.
Later engines have top-mounted hour meters positioned next to the
generator and signal harness main connector (harness 12354385). See
step 9 for top-mounted harness installation instructions.
i. Install loop clamps (29) onto harness angle brackets (85) using screws (30) with nut (31),
and new lock washers (32) (item 92, WP 0175).
j. Connect electrical connectors at hour meter (37), engine oil temperature transmitter (38)
engine oil pressure transmitter (39), low engine oil pressure switch (40), and high oil
temperature switch (41).
k. Install new self-locking nut (34) (item 33, WP 0175) with flat washer (35) to retain loop
clamp (36).
m. Install loop clamps (29) onto harness. Install screws (27) with new lock washers (28)
(item 92, WP 0175).
37
38
34, 35, 36
39
40
41
33
27 28
26
29
29
30, 31, 32
85
WP 0057 00-24
|
||
|
||
