| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
STARTER/ SMOKE GENERATOR/ DUST DETECTOR WIRING HARNESS REPLACEMENT,
0061 00
LVPM CRANKCASE MOUNTED (2CA, 2DA) (PN 11655456, 11682726)
REMOVAL (Continued)
NOTE
Engine models with 300 ampere electrical systems have only one
starter electrical ground strap (5).
2. Remove starter ground harness (4) and straps (5).
a. Remove nut (6) with lock washer (7).
b. Remove two starter ground harness (4) and two ground straps (5).
c. Reinstall nut (6) and lock washer (7) onto starter ground terminal post (8) for safe keeping.
d. Remove screw (9) with two flat washers (10) from starter mounting bracket (11) and
remove ground straps (5).
e. Cut and remove tie wraps (12) as necessary.
3. Remove starter positive harness (13).
a. Remove nut (14) with lock washer (15).
b. Remove two starter harness (13), and starter low voltage protection module
harness terminal (16).
c. Reinstall nut (14) and lock washer (15) onto battery terminal post (17) for safe keeping.
d. Remove machine screw (18) and disconnect starter low voltage protection module at
harness terminal.
e. Cut and remove tie wraps (12) as necessary.
14, 15
17
15
8
6, 7
18
13
12
11
9, 10
5
4
WP 0061 00-3
|
||
|
||
